How To Install A Large Motor Bearings Housing

    The motor is currently the most used machine. It is inseparable from the motor in both enterprises and homes. The general household is a small motor. Some enterprises use large motors. Large motors need install with  bearings. When selecting bearings. You need tochoose high quality guaranteed bearings to install, large motors are very important machinery, if it is because of the quality of the bearings. Poor quantity will cause motor failure or even damage, which will cause great damage, so we try to choose a better quality bearing to install.

    Also pay attention to the installation of large motor bearing housings. Here, we introduce the knowledge of large motor bearing housing installation..

    First, the bottom plate

    The bottom plate of a large motor is generally welded by steel plate or I-beam and channel steel.

    The bottom plate of the motor also has a block as a whole. Their role is to support the motor, transferring the dynamic and static loads of the motor to the base, keeping the size and clearance of the motor and part of the installation unchanged.

    Remove oil and remove rust preventive paint before installing the bottom plate. Especially in the joint with the cement, it should be cleaned with paint and wire brush, then wiped with a cloth, preferably a layer of cement slurry.

Bearings provide one-stop rotary service for the production of a wide range of motor bearings