• Jun , 27 2021

How to choose stamping bearing Metal stamping bearing play an important role for mechanical foundation parts,there bearings can widely used in various fields. Do you know how to choose a good stamping bearing, below here are some tips for you : 1. Bearing working speed: the bearing with small friction and less heat is suitable for high speed. we shall choose a stamped bearing have a smoo...

• Jun , 28 2021

The 6201-2RS-1/2 and 6201-ZZ-1/2 is bearing with inner diameter with  1/2 inch (12.7mm) ball bearing, the outer diameter and height are same as standard at 32mm and 10 mm . The  6201-1/2 bearings are with inner diameter 12.7mm ,we are produce with material Chrome steel Gcr15 , and we can produce with metal shield (ZZ)and rubber seal(2RS) ,you can choose as you need for. And we can produc...

• Jun , 30 2021

Thrust Ball Bearings are consists of three parts: ball, retainer and both shaft and housing washers which contain grooves for the ball. The thrust ball bearing only can bear axial loads. For material of thrust ball bearing material ,we can produce with stainless steel 304 ,440 and Chrome steel Gcr15 . Application of thrust ball bearings can bear one side axial load and low speed, they can used for...

• Jul , 06 2021

ZZ BEARINGS can produce with different color rubber seals color for you ,such as blue color ,red color and brown color . The most widely used color is black seals as below pictures . With different seal color ,the bearing quality are same ,just different customer will have different requirements . Such one of our custmoter want to replace old black bearing , to identify which one replace which on...

• Jul , 11 2021

Thrust ball bearing (Three-Piece Thrust Bearings and Washersis only suitable for bearing one side axial load) Deep groove ball bearing is mainly used to bear pure radial load, also can bear radial and axial load at the same time The deep groove ball bearing has the advantages of small friction coefficient, high limit speed and simple structure, Thrust ball bearing is mainly composed of shaft ring,...

• Jul , 14 2021

SUS440C Stainless steel Material    Specification C Cr Mn Si P S Mo 0.95-1.20% 16-18% 1.0%Max 1.0%Max 0.04%Max 0.03%Max 0.75%Max Mechancial Properties Tensile Strength 285,000 psi Yield Strength 275,000 psi Density 0.277 Ibs/cu in Physical Property Corrosion resistance Fair Magnetic Yes Size Range 0.8mm  ( 1/32" )    to    63.5mm   ( 2-1/2" ) Hardness H...